Timloc 1143 Weep Hole Vent Terracotta
0008052
£0.29 incl VAT (£0.24 excl VAT)
Each
In Stock
Product information
Timloc 1143 Weep Hole Vent Terracotta
Cavity wall weeps & vents
Multi-function products for discharging water from external walls
Use
Any situation where water must be discharged from an external wall, e.g:
- Ventilating cavity voids
- At ground floor slab level
- Within cavity tray systems
- Over external lintels
- Where a cavity must be ventilated
- On external walls ? 100mm or more in thickness ? built from brick, block or stone.
Features & benefits
- Purpose made and pre-formed to guarantee reliable discharge of water
- Free vent area 165mm2 for part code 1143
- Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open
- Integral front grille prevents entry of large nest building insects into the cavity when using product 1143
- 4mm wide front aperture prevents entry of large nest building insects into the cavity when using product TW1
- Range of colours to blend with brick or mortar colour (products 1143 and TW1 only)
- Can be made up to any length required using 50mm extension pieces part code 1144
Quality
- Satisfies all NHBC Standards 2008 Edition
- Manufactured to BS EN ISO 9001 : 2008
- Complies with all relevant Building Regulations
- Meets all relevant British Standards
Installation Advice
- Wall weeps should be used wherever water could collect inside a cavity wall, such as over external lintels, or wherever a cavity tray system is installed
- To work effectively wall weeps should be placed directly on top of the base of a cavity tray or DPC, or on the front flange of the lintel
- Wall weeps should be spaced at 450mm centres to comply with NHBC recommendations
- Care should be taken to ensure the wall weep is kept clear of mortar and does not become blocked. This is particularly important at the back of the weep which could be blocked by mortar droppings from above
Video
No video available.