UltraScape Flowpoint Smooth Rapid Set Grout Charcoal 25Kg Bag
Product information
Flowpoint Smooth: Rapid Set Flowable Grout- Charcoal
UltraScape flowpoint smooth is a fully pre-mixed dry-pack which only requires the addition of water on site. flowpoint smooth can fill joints from 4mm-50mm and joint depths of up to 200mm in one pour. This highly fluid grout achieves a final compressive strength of 49.6N/mm2* and will reach initial set in 20 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependant upon temperature.
UltraScape flowpoint smooth grout exceeds all the requirements of the latest British Standard. It has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic. The third variation of this award winning grout, flowpoint smooth, is ideally suited to smooth paving stones and slabs with joints as small as 4mm, providing a seamless surface to your construction.
- Unit Size: 25kg
- Colours: Natural Grey and Charcoal
- Set time: 20 minutes
- Open to foot traffic in: 1 hour
- Open to vehicular traffic: 4 hours
- Joint width: 4-50mm
- Joint thickness: 20-200mm
- Conforms to: BS 7533
Additional information:
- Provides a seamless surface
- Rapid setting
- Exceptional bond strength
- Shrinkage compensated
- Mixes quickly on-site with water
- Economical to use
- Ideal for large-scale projects
MIXING & APPLICATION
Once the paving is ready to receive the grout the following method must be adhered to:
Immediately prior to jointing it must be ensured that the joints are free from debris and all ponded water removed. The paving surface and joints must be pre-soaked and kept wet until the jointing process has been completed. A 25kg bag requires 4.25 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump free consistency has been achieved. Apply the mortar without delay. Do not store liquid mortar other than in transit from mixer. It must be carefully forced into the joints using a suitable rubber squeegee. The mortar should be constantly moved over the surface to repeatedly top up joints in which the mortar may have slumped following initial placement. Use the rubber squeegee to remove as much mortar as possible from the surface. The surface must be kept constantly moist using a soft spray of water. When the jointing mortar has hardened sufficiently or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water. Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving.
SPECIFICATION
Colour: Natural Grey or Charcoal
Yield: 13.9 litres (approx)
*Results achieved using 4.25 Litres of water per 25kg bag.
As with all raw materials, colour variation may occur. Please note that this does not affect the consistency or characteristics of the enclosed product.
WORKABILITY
Approximately 5-15 minutes depending on temperature.
PRECAUTIONS
Wash all tools frequently.
Mix only enough material to apply in 4 minutes.
Never remix or add extra water.
Wear protective clothing.
Avoid skin and eye contact - Wet cement can burn the skin.
Cool temperatures retard.
Warm temperatures accelerate.
Video
No video available.
