Ancon Movement Tie with Debonding Sleeve 200mm PPS

Ancon PPS Movement Tie

Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry against lateral wind loads but the sleeve will allow the masonry to expand or contract.

Debonded ties should be installed with a 10mm gap at the end of the sleeve to allow for expansion of the masonry

Debonding Sleeve

Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications.